오버헤드 크레인 고장 및 수리: 금속 구조물 및 이동 메커니즘을 위한 필수 솔루션
목차
Lifting machinery inevitably experiences aging and wear during use, leading to various failures. This article provides a comprehensive analysis of overhead crane failures and repairs, including fatigue cracks and deformations in the metal structure, as well as skewed travel and rail gnawing in the travel mechanism. By understanding these failures and their solutions, maintenance efficiency and overhead crane reliability can be significantly improved.
Failures and Repair of Overhead Crane Metal Structures
| 실패 | 원인 | 수리하다 |
|---|---|---|
| Fatigue cracks in the main girder web or cover plate | Overload for long time | For cracks less than or equal to 0.1 mm, use a grinding wheel to smooth them out. For larger cracks, drill holes larger than Φ 8 mm at both ends of the crack, then create a 60° groove along both sides of the crack and perform welding repairs. For critical load-bearing components, reinforce the repaired area with additional plates to ensure strength. |
| Wave-like deformation in the main girder web | Overloading, causing local instability of the web plate | Use flame straightening to correct the deformation. Use hammering to relieve internal stresses. Strictly prohibit overloading in the future. |
| Side bending of the main girder | Combined working stresses, improper transportation, or storage | Use flame straightening by heating the convex side of the main girder, and apply appropriate jacks and pulling tools as needed. |
| Main girder sinking deformation | Structural stress in the main girder, wave-like deformation of the web plate, overloading, thermal effects, improper storage or transportation, and other factors | Use the prestressing method for correction. After flame straightening, reinforce the lower cover plate of the main girder with channel steel. |
Failures and Repair of Overhead Crane Travel Mechanism
Bridge Travel Mechanism
| 실패 | 원인 | 수리하다 |
|---|---|---|
| Bridge girder skew and rail gnawing | Excessive diameter difference between the two drive wheels | Measure, machine and replace 크레인 휠 |
| Driving wheels are not fully contact with rail | Balance rails and adjust the wheel | |
| Excessive horizontal deviation of the wheel | Check and eliminate excessive horizontal deviation of the wheel | |
| Deformation of metal structure | Rectify | |
| Excessive deviations in gauge, lateral straightness, and height difference between the two rails | Adjust rail and make rail installation satisfy technical requirements | |
| Oil or frost on the rail surface | Remove oil and frost |
Overhead Crane Trolley Travel Mechanism
| 실패 | 원인 | 수리하다 |
|---|---|---|
| Roil skid | Oil on the rail | 깨끗한 |
| Wheel load is not even | Adjust wheel load | |
| Rail top height difference is too much at the same cross-section | Adjust rail till it meets technical requirements | |
| Start or brake too violently | Change the method of motor start, choose winding motor | |
| Trolley twists when starting | Uneven wheel pressure or one drive wheel lifting off. Rail gnawing. | Adjust the problem that only three wheels touch the rail. Resolve rail gnawing. |
결론
The above outlines common overhead crane failures and repair methods during operation, addressing issues in both metal structures and travel mechanisms. By analyzing the causes of these failures and providing practical repair solutions, this guide aims to enhance your understanding of effective equipment maintenance and troubleshooting, ensuring safer operations, reduced downtime, improved productivity, extended equipment lifespan, and cost savings for industrial facilities.
관련 블로그
오버헤드 크레인 호이스트 메커니즘 고장 및 수리: 일반적인 구성 요소 문제 및 솔루션
오버헤드 크레인 전기 시스템 고장 및 수리: 전기 장비, 전기 제어 및 회로
저는 신디입니다. 크레인 산업에서 10년의 근무 경험을 쌓았고 풍부한 전문 지식을 축적했습니다. 저는 500명 이상의 고객을 위해 만족스러운 크레인을 선택했습니다. 크레인에 대한 필요 사항이나 질문이 있으면 언제든지 저에게 연락하세요. 저는 제 전문 지식과 실무 경험을 활용하여 문제를 해결하도록 도와드리겠습니다!
문의 보내기
- 이메일: sales@hndfcrane.com
- 왓츠앱: +86-191 3738 6654
- 전화: +86-373-581 8299
- 팩스: 0373-215 7000
- 추가: 중국 허난성 신샹시 창나오 공업구